CAPI VP26 Litz Wire

The VP26 preamp is essentially an exact recreation of the legendary preamp circuit found in the vintage API consoles of the mid to late ’70’s. The 528/536 input modules have precisely this same exact circuit. The rest of the circuit is slightly different than the ever popular 312 schematic or what is found on the 312 cards themselves. You will find a few more components in the audio path like coupling capacitors on both sides of the discrete opamp. The use of series and loading resistors, along with a few decoupling capacitors is also faithfully implemented.

The love-hate relationship with the input pad is loyally carried out on this board. The simple voltage divider or U-pad resistor network follows the exact method used on the original module. This method is historically and mathematically correct, unlike many pads implemented into the 312 type circuits. Notes on the schematic give the builder a choice of attenuation levels, with the standard and original version being -20db. You can choose from a few options calculated to represent similar source and load impedances to the ones that exist in the circuit before the pad is engaged. While some of these will provide as little as half of the attenuation, the source and load impedances may be a slight compromise, changing the interaction between microphone and preamplifier. Maybe for the better, maybe for the worse. Experimentation required. Let your ears be the judge!

The mic input transformer is a CA2622. This transformer is a custom made audio input transformer. The CA2622 has been designed by us to sonically replicate the transformers found in the vintage API recording consoles from the 1970’s. In the console, this transformer was used as the microphone input transformer on the input channels. Albeit a modern footprint, this input transformer will give your mic preamp the same signature vintage tone as an original AP2622.

For the balancing output transformer, the VP26 is using a trifilar wound 2623-1-L. The 2623-1-L is a custom made audio output transformer. The 2623-1-L has been designed to replicate the transformers found in the vintage API recording consoles from the 1970’s. This transformer was used in the “preamp out” and the “direct out” positions of the vintage consoles

The last and possibly most unique feature of the VP26, is the use of a custom, Bourns 600 ohm T-pad output attenuator. The 3-module attenuator gives the user the ability to drive the preamp harder, and simply turn down the output level. The insertion loss of the t-pad is very minimal with a near perfect transfer of power, from input to output. This is the exact same attenuator as used for the input of the popular 1176 compressor builds. The t-pad can be skipped if so desired. The PCB is clearly marked and requires only moving two of the flying leads from the output transformer.

Of course, the discrete operational amplifier is the heart of this preamp. The industry standard 2520 footprint is utilized here. This preamp utilize one opamp (discrete operational amplifier).

Features

• 60dB of gain provided by a 2520 style opamp.
• -20dB Pad switch, polarity switch, and mute switch.
• Fast drain 48V Phantom power.
• Output attenuator which allows you to drive the opamp and 2623 output transformer HARD and attenuate back down to digital safe levels (this is something rarely implemented on Api style preamps, and makes for a huge variety of tones).

These are 100% VPR alliance compliant 500 series preamps.

Fully built to perfection in Canada with a 1 year warranty.

These can be also build to order.